MOBIUS MILL M210 USER GUIDE
16
GENERAL OPERATION
PRIOR TO DEVICE OPERATION, ENSURE ALL GUARDS AND THE
UPPER HOPPER ARE IN PLACE AND PROPERLY SECURED
PRESS THE E-STOP BUTTON AT ANY TIME TO STOP ALL MOVING
PARTS AND TURN OFF THE MACHINE
MACHINE START UP SEQUENCE
TOGGLING ROTATOR DIRECTION
1. Ensure the rotor and screen are properly installed.
2. Ensure the access door is properly closed and latched.
3. Ensure e-stop is disengaged.
4. Press the start/reset button to turn on the machine. When active, the start/reset button will be
illuminated.
5. Press the forward or reverse button to engage the rotor.
6. Turn speed dial to desired speed.
While the machine is in operation:
1. Press the stop button to stop rotor motion. Note: The rotor must be stopped prior to toggling
direction.
2. Press the forward or reverse button to engage the rotor in the desired direction.
To Next Page
Loading...