Mobius M210 - Intended Use of Equipment; Operating Conditions

9
MOBIUSTRIMMER.COM
The M210 is designed and manufactured for the milling, grinding, blending and consistent particle size
reduction for cannabis and hemp. It should be used in a laboratory, clean room or production type
environment.
To optimize the performance of your M210 please ensure that your product is:
• Cannabis or Hemp
• Flower, leaf or trimmings
• Fully bucked or de-stemmed
• Dry to a moisture content of 8%-12%
NOTE: THIS DEVICE IS NOT TO BE OPERATED IN WET LOCATIONS.
OPERATING CONDITIONS
Location Indoor
Altitude 0 - 2000 metres above sea level
Temperature (ambient) 5
•
C - 25
•
C
Relative Humidity 25% - 75%
Voltage 115 V +/- 10%
230 V +/- 5%
Pollution Degree 2
Overvoltage Category II
*** SEE USER GUIDE FOR INPUT VOLTAGE CONFIGURATION ***
INTENDED USE