7
MOBIUSTRIMMER.COM
GENERAL SAFETY PRECAUTIONS
1. READ and become familiar with the entire User Guide. LEARN the equipment applications, limitations,
and possible hazards.
2. KEEP GUARDS IN PLACE and in working order including the upper product hopper.
3. DO NOT USE IN A DANGEROUS ENVIRONMENT or damp or wet locations. Never expose control
panel directly to rain or water. Keep work area well illuminated.
4. DO NOT use the device in the presence of ammable liquids or gases.
5. KEEP WORK AREA CLEAN. Cluttered areas and workspace invite accidents.
6. KEEP CHILDREN and BYSTANDERS AWAY from the device. Visitors should be kept at a safe distance
from the work area.
7. DON’T FORCE THE EQUIPMENT. It will operate optimally and safely at the rate for which it was
designed.
8. USE THE RIGHT TOOL. Don’t force the device to do a job for which it was not designed.
9. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other
jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective
hair covering to contain long hair.
10. ALWAYS OPERATE DEVICE IN A WELL-VENTILATED AREA. Dust generated from certain materials can
be a health hazard. Use a dust collection system whenever possible.
11. WEAR A FACE MASK OR DUST MASK. Milling operation may produce dust. If dust extraction is not
considered, a dust mask must be worn.
12. POWER DOWN AND DISCONNECT EQUIPMENT before servicing and when changing accessories,
such as screens, rotors, etc.
13. CHECK FOR DAMAGED PARTS PRIOR TO OPERATION. The equipment should be inspected prior to
use to ensure proper operation in performing its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may
affect its operation. Any damaged part including guards should be properly repaired or replaced.
14. ALWAYS WEAR EYE PROTECTION.
15. Hearing protection is generally not required when operating the M210. We recommend that noise
levels are monitored to ensure that all local, municipal, provincial and federal regulations and
recommendations are adhered to.
To Next Page
Loading...