Mocka Detroit Trolley Shelf

To Next Page

Thank you for your purchase.

Please follow t he instructions below for correct assembly.

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

Hardware Supplied

Phillips screwdrivers

nut bolt screw

caster

wheel

caster

wheel

x12

Detroit Trolley Shelf

Assembly Instructions

Need help?

Do you have a question about the Mocka Detroit Trolley Shelf and is the answer not in the manual?

Summary

Detroit Trolley Shelf Assembly

Hardware Supplied

Lists all hardware components provided for assembly, including nuts, bolts, screws, and caster wheels.

Required Tools

Specifies the need for Phillips screwdrivers and recommends a power drill for quicker assembly.

Step 1: Assemble Base Frame

Attach Panels to Frame

Connect panels [1] and [2] to panel [3] using 6 screws (B) and 6 bolts (A).

Step 2: Attach Shelf Panels

Secure Shelf Panels

Attach 3 shelf panels [4] to the main frame using 12 screws (C).

Step 3: Install Caster Wheels

Attach Caster Wheels

Lay the frame on its back and attach 2 caster wheels (E) to the left and 2 caster wheels (D) to the right.

Step 4: Final Placement

Position Trolley

Lift the assembled frame to an upright position and wheel it into its desired location.