EasyManua.ls Logo

Mocka House Bed Single User Manual

Mocka House Bed Single
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
House Bed - Single
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
1
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
long screw
x8
bolt
x16
locking nut
x16
A
B C D E
dowel
x24
F
allen key
x1
screw
x6
Question and Answer IconNeed help?

Do you have a question about the Mocka House Bed Single and is the answer not in the manual?

Mocka House Bed Single Specifications

General IconGeneral
BrandMocka
ModelHouse Bed Single
CategoryIndoor Furnishing
LanguageEnglish

Summary

Assembly Instructions

Step 1: Assemble Base and Sides

Insert dowels and locking nuts into panels [4] and [1], then attach to panels [2] using long screws.

Step 2: Attach Frame Panels

Attach panels [3] to panel [12] using dowels.

Step 3: Connect Main Frame

Insert dowels and locking nuts into panels [5] and [3], then attach to panels [4] and [1] using bolts.

Step 4: Assemble Roof Structure

Insert dowels into panel [10], then attach panels [6], [7], [8], [9], and [10] using bolts.

Step 5: Secure Roof Structure

Insert dowels into panels [5], then attach panels [6], [7], and [8] to panels [5] using bolts.

Step 6: Attach Slats

Attach panels [11] to panels [4] and [1] using screws.

Related product manuals