Mocka Zara User Manual

Zara Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
bolt
x14
A B
C D
E F
G
H
J
K
I
Hardware Supplied
dowel
x24
screw
x6
bolt
x
16
bracket
x4
allen key
x1
shelf
plug
x4
screw
x4
locking
nut x14
screw
x10
x8
wedge
L
M
N
O P Q R
screw
x8
hinge
x4
screw
x24
cover
x2
bracket
x2
seal
x2
S
screw
x8
felt pad
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Mocka Zara Specifications

General

Brand	Mocka
Model	Zara
Category	Indoor Furnishing
Language	English

Summary

Zara Cabinet Assembly Overview

Important Safety Warning: Tipping Hazard

Warns about furniture tipping and stresses the necessity of wall anchoring for safety.

Step 10: Attach Cabinet Legs

Assemble and Attach Legs

Attach leg brackets, legs, and felt pads using screws and an allen key.

Step 14: Attach Hinges and Seals

Mount Hinges and Seals on Doors

Attach hinges (M) to panels [13] and [14] using screws (N), and add seals (R).

Step 15: Mount Doors and Adjust

Attach Doors and Ensure Flushness

Mount doors to the unit, adjust hinges for evenness, and ensure magnetic seal works.

Step 17: Secure Back Panel and Add Strap

Attach Wedges and Safety Strap

Secure back corners with wedges (J) and screws (L), attach safety strap (V).

Step 18: Wall Anchoring

Fasten Safety Strap to Wall

Create a hole lining up with the safety strap and fasten to the wall using anchor, washer, and screw.