e1
e2
e3
e4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
A B1
B2 B3 C D
I
F G H JE
Hardware Supplied
30mm
bolt x2
25mm
bolt x4
mini
fix x23
20mm
bolt x4
12mm
screw x16
25mm
screw x2
slide rail
x2 sets
50mm
screw x19
25mm
bolt x1
foot
pad x4
capped
nut x1
nut
x4
WARNING: Any furniture that is not anchored to a wall
has the potential to tip over in certain circumstances, i.e.
if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety
wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please
note that different wall materials may require different
fixing devices from those supplied.
Phillips & Flathead
screwdrivers required
Z
wall
anchor
x1
Y
safety
strap x1
X
Wall Strap
W
wall
screw x1
r/washer
screw
x1
Vigo Desk
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
To Next Page
Need help?
General
