Mocka Hobart Storage Cot - User Manual

Hobart Storage Cot
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
30” bolt
x28
B
dowel
x12
C
50” bolt
x16
D
nut
x16
E
60” bolt
x6
F
allen key
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
left guide
x2
L
screw
x24
M
knob
x2
N
30mm screw
x2
H
left rail
x3
J
right guide
x3
K
right rail
x2
WARNING: TO PREVENT FALLS, THE MATTRESS BASE
OF THIS COT SHOULD BE ADJUSTED TO THE LOWEST
POSITION BEFORE THE CHILD CAN SIT UP

Mocka Hobart Storage Cot Specifications