Need help?Do you have a question about the Modas mc4 and is the answer not in the manual?
Explains the initial setup process using the MC-Config tool via the LAN interface.
Describes the procedure to reset the MC to its default factory configuration settings via the reset button.
Supports resetting configuration, downloading, and uploading configuration files.
Provides access to configuration dialogs for MC functions like Admin, Network, and Wireless.
Connects LAN devices to WLAN, determining IP/MAC from the LAN client.
Works in a separate network, transforming LAN client traffic via the MC's IP address.
Each LAN client uses its own IP, but data uses the MC's MAC address.
Solves IP assignment and transparency issues by tunneling client data to another MC.
Configures main parameters like mode, profiles, frequency band, and transmission power.
Allows defining and switching between multiple WLAN SSID profiles with different settings.
Specifies encryption methods (WEP, WPA, WPA2) and keying protocols for WLAN security.
Maintains data connection in mobile environments by switching to better positioned access points.
Records system messages and data traffic for problem investigation.
Captures and records data traffic on LAN/WLAN interfaces for analysis.
Lists parameters for serial interface activation, device, baud rate, and network configuration.
General| Brand | Modas |
|---|---|
| Model | mc4 |
| Category | Network Hardware |
| Language | English |
To Next Page
