Need help?Do you have a question about the Modas mc2 and is the answer not in the manual?
Details the LEDs and ports of the MC1, including connectors and pin assignments for Serial and Power.
Describes the front and back panel plug assembly for the MC2, including LAN, Serial, and USB ports.
Details the back panel plug assembly for the MC4, including multiple LAN ports, Serial, and USB.
Guides on using the MC-Config tool for initial setup, device detection, and viewing wireless details.
Describes the process to reset the MC to its default factory settings using the reset button and LED sequences.
Accesses functions for firmware upgrades and configuration file management (reset, download, upload).
A mode where the connected LAN client determines the MC's WLAN IP and MAC address for network access.
Lists parameters for the LAN Client Cloning mode, such as client type and IP settings.
Modes where LAN clients operate in a separate network, with traffic NATed by the MC's IP address.
A transparent bridging mode where LAN clients use their own IP addresses over the wireless network.
Configures MWLC mode for multiple LAN clients using tunneling to a master MC for network access.
Sets the wireless mode (Client, Ad-Hoc, AP) and configures parameters for up to 8 WLAN profiles.
Configures encryption methods (WEP, WPA/WPA2), keying protocols, and security keys for wireless access.
Enables and configures EAP authentication methods (TLS, TTLS, PEAP, LEAP) for enhanced wireless security.
General| Brand | Modas |
|---|---|
| Model | mc2 |
| Category | Network Hardware |
| Language | English |
To Next Page
