Modas mc2 - Access Point List; Figure 20: Parameter for the Pingtest Function; Figure 21: Preferred or Avoided AP List

5.3.3 Access Point List
Here you can define access points that should either preferred or avoided by the MC device when a roaming
decision has to be made.
This option is only active when the "AP Density" parameter is set to "autodetect".
The access points are identified with the MAC address of the BSSID.
This function makes sense if the MC device always moves over a fixed course and in an environment with
many APs. Then it may be good if only certain APs should be used to run this course with as few roamings
as possible.
The "Avoid" mode can be useful if access points are received good for some time, but are quickly hidden in
the movement. Putting this AP's to the Avoid-List can lead to better roaming decisions.
MC Manual Version 2.10c
31
Figure 20: Parameter for the Pingtest function
Figure 21: Preferred or avoided AP list