Model Tech Magic V2 User Manual

Page 1
FEATURES
ASSEMBLY INSTRUCTIONS
Kit Product Number 123738 (MT3192A-1)
Wing Span:
52 Inches (1321mm)
l
Wing Area: 725 Square Inches (46.77dm
2
)
l
Length: 44 Inches (1118mm)
Weight RTF: 3 to 4.5 Pounds (1361 to 2041gr)
l
Wing Loading: 9.5 to 14.3 Ounces/Square Foot (20.09 to 43.64gr/dm
2
)
Functions: Ailerons, Elevator, Rudder and Throttle
l
Engine Required: .36 - .46 Two-Stroke or .52 Four-Stroke
Radio Required: 4-Channel or More w/5 Standard Ball Bearing Servos
l
Motor Required: KMS Quantum 4120/05 Brushless Outrunner
ESC Required: 60 Amp Brushless
l
Battery Required: 4 Cell 4000mAH LiPO
Made in China
l
Pre-Covered with Premium Model Tech Iron-On Covering Material
l
Laser-Cut, Lightweight Balsa and Plywood Construction
l
Proven Design
l
Battery Door On Fuselage Bottom for Electric Flyers
l
Adjustable Width Engine Mounting to Fit Different Size Engines
l
Compatible with Glow Power or Electric Power
l
Dual Aileron Servos and Pull-Pull Elevator and Rudder Cables
l
Includes High-Quality Hardware
l
Fast and Easy Assembly - Over 60 High-Resolution Digital Photos and Drawings
SPECIFICATIONS
The plane that started it all, the Model Tech Magic is a classic among 3D enthusiasts. For today's pilot, Model Tech has updated this
original Mark Leavesley design to incorporate everything the modeler has desired. First, we made it more easily electric compatible.
A door on the bottom of the fuselage, in addition to the removable throttle servo tray, allow easy access to the battery. For the glow
engine enthusiast, the rewall has been modied to make engine installation easier, including slots for the engine mounting screws
that allow the installation of different width motors. We also upgraded the hardware with traditional pull/pull cables (not rods) for the
elevator and rudder. We even made the wing bolt-on with nylon bolts threaded into hardwood, which is tapped at the factory. All
this in a model that is now laser-cut for precision and covered with a new, more aggressive color scheme in high-quality Model Tech
iron-on covering material. Model Tech engineers have been hard at work giving you a plane you know ies great, with the features
you want, in a plane that is affordable and fun. Put some Magic in your ying with the Magic V2 from Model Tech.
© 2007, Model Tech Co., Ltd.
All Rights Reserved
Version 2 October 2007
Model Tech Co., Ltd.
Hong Kong

Model Tech Magic V2 Specifications

General

Brand	Model Tech
Model	Magic V2
Category	Toy
Language	English

Summary

Recommendations for Power Systems

Glow Power System Recommendations

Guidance on engine, radio, and servo choices for optimal glow power performance.

Electric Power System Recommendations

Guidance on motor, ESC, battery, radio, and servo choices for electric power.

Safety and Preparation

LiPo Battery Safety and Handling

Critical warnings and precautions for using and charging LiPo batteries safely.

Tools and Supplies Required

List of necessary tools and materials for model assembly.

Covering Material and Assembly Tips

Notes on covering material care and expert advice for building.

Kit Contents and Airframe Assembly

Kit Components Overview

Detailed listing of parts included in the kit.

Wing Assembly Procedures

Steps for hinging ailerons, installing servos, and joining wing panels.

Wing Mounting to Fuselage

Attaching the assembled wing securely to the main body.

Tail Section and Landing Gear Assembly

Stabilizer Installation

Aligning and securing the horizontal and vertical stabilizers.

Hinges for Elevator and Rudder

Attaching the elevator and rudder control surfaces to their respective stabilizers.

Tail Skid Installation

Mounting the tail skid for ground handling.

Landing Gear Installation

Attaching the main landing gear bracket and wheels.

Power System and Control Installation

Glow Engine Installation

Mounting the engine and its associated components for glow power.

Glow Throttle Control System

Installing the throttle servo, pushrod, and connector for glow engines.

Fuel Tank Assembly and Installation

Preparing and mounting the fuel tank for glow engines.

Elevator Control System

Installing the elevator servo, horns, and pull-pull cables.

Rudder Control System

Installing the rudder servo, horns, and pull-pull cables.

Aileron Control System

Installing aileron servos, horns, and linkages.

Final Assembly and Setup

Final Assembly Procedures

Applying decals, mounting hatch cover, and installing electronics.

Center of Gravity and Balancing

Achieving correct balance for optimal flight performance.

Flight Setup and Preflight Checks

Adjusting control throws, exponential, and performing safety checks.

Electric Conversion and Product Information

Electric Conversion Instructions

Step-by-step guide for installing the electric motor, ESC, and battery.

Replacement Parts List

Information on how to order spare parts for the model.

Product Evaluation Form

A customer feedback form to provide input on the kit.