Model Tech Blue Max User Manual

Page 44
Page 1
Fold along dotted line
Fold along dotted line
Global Hobby Distributors
Attn: Global Services
18480 Bandilier Circle
Fountain Valley CA 92728-8610
3RVW2I¿FH
will not deliver
without proper
postage
_______________________________
_______________________________
_______________________________
(Return Address Here)
Kit Product Number MT3200-1
Check out our website for more information on other exciting Model Tech products!
HTTP://MODELTECH.GLOBALHOBBY.COM
Made in China
FEATURES
ASSEMBLY INSTRUCTIONS
Wing Span: 67.25 Inches (1708mm)
O
Wing Area: 756 Square Inches (48.77dm
2
)
O
Length: 49.5 Inches (1257mm)
Weight RTF: 5.5-6.5 Pounds (2495-2948gr)
O
Wing Loading: 16.76-19.81 Ounces/Square Foot (51.15-60.45gr/dm
2
)
Functions: Ailerons, Elevator, Rudder and Throttle
O
Engine Required (Glow Version): .40 - .52 Two-Stroke or .52 - .61 Four-Stroke
Power System Required (Electric Version): 4120/05 Brushless Outrunner / 80 Amp Brushless ESC / 4 Cell 4000mAH LiPO
O

Completely Prebuilt and Covered with Iron-On Covering Material
O

Accepts Glow Power and Brushless Electric Power Systems
O

Stable, Predictable Flight Characteristics
O

Fiberglass Cowl, Durable Main Landing Gear and Wire-Spoke Wheels
O

Details Include Wing Struts, Flying Wires, and Moulded Pilot and Cannon
O

Complete Hardware Set - Wheels, Pushrods, Fuel Tank, Clevises, Etc.
O
Fast and Easy Assembly - Over 140 High-Resolution Photos to Guide You
SPECIFICATIONS
Model Tech Co., Ltd.
Hong Kong
© 2008, Model Tech Co., Ltd.
All Rights Reserved
Version 1 February 2008

Model Tech Blue Max Specifications

General

Brand	Model Tech
Model	Blue Max
Category	Toy
Language	English

Summary

Our Recommendations

What Glow Engine Should I Use?

Recommendations for selecting a glow engine size and type.

What Brushless Power System Should I Use?

Recommendations for brushless motor, ESC, and battery.

What Radio Control System and Servos Should I Use?

Guidance on required radio system and servo types.

What Other Items Do I Need?

Lists additional recommended items for completion.

Wing Assembly

Step 1: Aligning the Wing Panels

Procedure for aligning wing panels before joining.

Battery Hatch Installation - Electric Version Only

Step 1: Assembling the Hatch Cover

Instructions for assembling the battery hatch cover.

Hinging the Control Surfaces

Step 1: Hinging the Ailerons

Detailed steps for hinging the ailerons using thin C/A.

Aileron Control System Installation

Step 1: Installing the Aileron Servo

Instructions for installing the aileron servo into the wing.

Step 2: Installing the Aileron Control Linkage Assemblies

Guide for connecting the servo to the ailerons via linkage.

Elevator and Rudder Control Systems Installation

Step 1: Installing the Elevator and Rudder Servos

Steps for installing elevator and rudder servos in the tray.

Step 2: Installing the Elevator Pushrod Assembly

Instructions for installing the elevator pushrod system.

Engine Installation - Glow Version

Step 1: Installing the Plywood Filler Blocks

Procedure for installing plywood filler blocks on the firewall.

Step 2: Installing the Engine Mounting Beams

Steps to glue engine mounting beams to the firewall.

Throttle Control System Installation - Glow Version

Step 1: Installing the Throttle Servo

Instructions for installing the throttle servo.

Wing Struts and Flying Wires Installation

Step 1: Installing the Flying Wires Mounting Post

Procedure for mounting the flying wires post on the wing.