1
Version V1.0 6-99 MTN Modeltech ARF Kit # 123672 All Contents © Copyright 1999
Thank you for purchasing the new Modeltech Extra 300 ARF. This is a stand-off scale .25-.36 size
model of the full size Extra 300. Aerobatic pilot and aircraft designer Walter Extra developed the Extra
300 in 1987. The Extra’s shape epitomized the modern, sleek unlimited aerobatic monoplane.
Utilizing a powerful 300 horsepower 6 cylinder engine, an airframe built of Aluminum, Carbon
Fiber, Plexiglass and Honeycomb materials all added up to a lightweight airframe with a considerable
power to weight ratio. This combination is perfect for aerobatics.
Now you can share the same excitement as the full size Extra pilots. The Modeltech Extra 300
comes factory prebuilt using only the finest grades of balsa, plywood and adhesives. Covering is heat
shrink polyester, just like you would use on a model you built yourself. A molded plastic top deck and
belly pan, molded fiberglass cowl and molded clear canopy help accentuate that sleek, aerobatic look.
The Extra comes complete with all the hardware you need, including a fuel tank, spinner, wheels, C/A
hinges and much, much more. It's amazing that all this can be designed into such a small package,
but Modeltech has done it again. But don't let the small size of the Extra fool you. This Extra is big on
performance, just like the full size Extra it's modeled after. It's also easy to assemble. You'll be doing
lomcevaks and inverted snaps in no time!
Instructions for Final Assembly
To Next Page
Need help?
General
