4
q {1} Hitec 4 or More Channel Radio w/4 Servos
q {1} Dubro Foam Rubber # 513
q {1} Global Fuel Line # 115923
q {1} Dubro Fuel Filling Valve # 334
q {1} Dubro In-Line Fuel Filter # 340
q {1} Magnum XL .25 - .28 Two Cycle
q {1} Propeller To Suit Engine
q {1} Thunderbolt Glow Plug # 115493
q Kwik Bond Thin C/A # 887500
q Kwik Bond Thick C/A # 887510
q Kwik Bond 5 Minute Epoxy # 887560
q Kwik Bond 30 Minute Epoxy # 887565
q Wilhold Silicon Sealer # 00684
q Pacer RC256 Canopy Glue # PT-56
q Electric Drill
q Assorted Drill Bits
q Modeling Knife
q Machine Oil or Vaseline
q Straight Edge Ruler
q Dremel Tool w/Assorted Bits
q Phillips Screwdriver
q Builders Triangle
q 220 Grit Sandpaper
q Masking Tape
q Paper Towels
q Rubbing Alcohol
q Wire Cutters
q Magnum 12V Electric Starter (# 361006)
q Magnum 12V Fuel Pump (# 237377)
q Magnum Locking Glow Clip (# 237440)
q Global 12V Battery (# 110171 )
q Global 12V Charger (# 110270 )
q Magnum Power Panel (# 237390)
q Global Field Buddy Flight Box (# 233072)
q Magnum 4-Way Wrench (# 237420)
To convert inches into millimeters: Inches x 25.4 = MM
1/64” = .4mm
1/32” = .8mm
1/16” = 1.6mm
3/32” = 2.4mm
1/8” = 3.2mm
5/32” = 4.0mm
3/16” = 4.8mm
1/4” = 6.4mm
3/8” = 9.5mm
1/2” = 12.7mm
5/8” = 15.9mm
3/4” = 19.0mm
1” = 25.4mm
2” = 50.8mm
3” = 76.2mm
6” = 152.4mm
12” = 304.8mm
18” = 457.2mm
21” = 533.4mm
24” = 609.6mm
30” = 762.0mm
36” = 914.4mm
q {1} Ernst Charge Jack # 124
q {1} Cirrus On-Board Battery Indicator # 444762
q {1} Magnum 2” Aluminum Spinner # 237152
OPTIONAL ITEMS
FOR 2-STROKE ENGINE
ADDITIONAL ITEMS REQUIRED
TOOLS AND SUPPLIES NEEDED
FIELD SUPPORT EQUIPMENT NEEDED
METRIC CONVERSION CHART
TO FINISH PILOT
q Testors Contour Putty # 3511X
q 320 Grit Sandpaper
q Find & Medium Paint Brushes
q Paint Thinner
q Tan, White, Brown and Orange - Mix to make
skin color and lip color and hair color
q Flat Black - Goggles
q Blue, Red, Flat Black - Hat and Body
To Next Page
Loading...
