14
• Fix the one-way-valve to the air outlet of the exhaust hood. Then, attached
the exhaust pipe into the one-way-valve as shown below.
Installation (Re-circulating System):
•
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section “Installation (Ducting/Exhaust
System)”.
• Activated carbon filter can be used to trap odors.
• In order to install the activated carbon filter, the grease filter should be
detached first by press the lock and pull it downward.
• Plug the activated carbon filter into the unit and turn it in clockwise direction.
Repeat the same on the other side
To Next Page
Loading...
