Modern Forms MORPHEUS II - Wall Control Reset Procedures; Factory Resetting the Control

24 FR-W1812; FR-W1813
Factory Reset
NOTE: This will remove wall control and app connections.
Press and hold the , and buttons for 10 seconds.
1. The LED will blink red and return to solid red, and the receiver
will beep to indicate that the factory reset is successful.
Receiver Button Factory Reset
1. Press the button on the receiver until the receiver beeps (FIG. 28).
NOTE: This will remove wall control and Modern Forms app connections.
13. Wall Control Operating Instructions (cont.)
FIG.28