GENERAL RECOMMENDATIONS
AND TECHNICAL DATA
GB
Ed. 0314
9
SPECIAL INSTRUCTIONS
• Current regulations require the installation of a multiple pole switch between the appliance and the electrical power supply;
the switch must have a contact gap of least 3 mm on each pole.
• The manufacturer cannot be held liable and declines all guarantee obligations regarding any claims for damages
ensuing from bad installation or failure to observe current regulations.
LAWS, TECHNICAL REGULATIONS AND STANDARDS
Throughout installation it is vital to observe the following requirements:
• any health and hygiene standards applicable to kitchens and eating places
• local and/or territorial building regulations and fire prevention standards
• current accident prevention guidelines
• the regulations of the electrical power supply company or agency
• any other local regulations
This product conforms with EU2002/96/EC compliance.
The crossed basket symbol on this product stands to indicate that cannot be disposed of through normal waste,
but should be referred to a specialized centre competent in disposal of this type of goods.
The user of such product is responsible of the disposal of this product at the end of it's life in order to avoid negative effects on the
environment.
For further information related to the disposal please contact the local authority specialized in re-cycling of these type of products.
SOUND PRESSURE
The sound pressure level emitted by the product is less than 70dB.
To Next Page
Loading...
