modway 6211 User Manual

Thank you for purchasing the MODWAY BED!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.
2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approx assembly time: 20 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save tools that have been provided.
6. Please keep all fitting out of reach of children.
Component:
MOD-6211
01 of 03
Customer Service 609-256-9000
www.modway.com
SUPPORT WOOD
BED FRAME
(DOES NOT INCLUDE
WITH THE PURCHASE)
1 PC
2 PCS
A
B
C
-
HEADBOARD

modway 6211 Specifications

General

Category	Indoor Furnishing
Frame Material	Wood
Assembly Required	Yes
Type	Armchair
Leg Material	Wood

Summary

Modway Bed Assembly Instructions

Helpful Advice Before Assembly

Read through instructions, assemble with two adults, use provided tools only, and keep parts away from children.

Bed Components List

Lists components A (Headboard), B (Support Wood), and C (Bed Frame) with quantities.

Hardware and Step 1 Assembly

Hardware for Headboard and Bed Frame

Details specific bolts, washers, and Allen keys required for headboard and bed frame assembly.

Step 1: Attach Support Stands to Headboard

Align and secure support stands to the headboard using bolts and washers, tightening with the Allen key.

Step 2: Secure Headboard to Bed Frame

Step 2: Assemble Headboard and Bed Frame

Line up holes, attach headboard to bed frame using specified bolts, washers, and nuts, then tighten.

Step 3: Final Bed Frame Assembly