modway MOD-6214 User Manual

MOD-6214
Thank you for purchasing the MODWAY BED!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.
Customer Service 609-256-9000 | www.modway.com
01 of 05
2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approx assembly time: 40 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save tools that have been provided.
6. Please keep all fitting out of reach of children.
Components:
A
HEADBOARD PANEL
1 PC
B FOOTBOARD PANEL
1 PC
C
SIDE RAIL
2 PCS
D CENTER RAIL
1 PC
E CENTER RAIL LEG
3 PCS
F BED LEG (L)
2 PCS
G
BED LEG (R)
2 PCS
H LEG SUPPORT RAIL
2 PCS
I LEG MOUNTING PLATE
4 PCS
J BED SLATS
1 SET
B
E
F
G
H
A
C
D
J
I

modway MOD-6214 Specifications

General

Brand	modway
Model	MOD-6214
Category	Indoor Furnishing
Language	English

Summary

Hardware Identification

Assembly Instructions

Step 1: Attach Legs

Connect bed legs (F, G) to side rails (H) using bolts.

Step 2: Attach Center Rail Legs

Attach center rail legs (E) to the footboard panel (B).

Step 3: Connect Headboard/Footboard to Side Rails

Attach headboard (A) and footboard (B) panels to side rails (C).

Step 4: Secure Side Rails

Fasten side rails (C) to headboard (A) and footboard (B).

Step 5: Attach Center Rail

Connect the center rail (D) to the side rails (C).

Step 6: Attach Support Rails

Secure support rails (H) to headboard (A) and footboard (B).

Step 7: Attach Center Rail Legs

Attach center rail legs (E) to the center rail (D).

Step 8: Secure Center Rail Assembly

Fasten the center rail (D) assembly to the main bed frame.

Step 9: Install Bed Slats

Place and secure bed slats (J) onto the frame.

Step 10: Final Assembly Check

Confirm assembly is complete and secure.