modway MOD-6218 - User Manual

To Next Page

MOD-6218

Thank you for purchasing the MODWAY BED!

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.

Customer Service 609-256-9000 | www.modway.com

01 of 03

2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approx assembly time: 20 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save tools that have been provided.

6. Please keep all fitting out of reach of children.

Components:

HEADBOARD

1 PC

B HB SUPPORT

2 PCS

BED FRAME

(DOES NOT INCLUDE

WITH THE PURCHASE)

Need help?

Do you have a question about the modway MOD-6218 and is the answer not in the manual?

This document provides assembly instructions for the Modway Bed, model MOD-6218. It outlines the steps required to assemble the headboard and attach it to a bed frame, along with important advice for a smooth assembly process and proper maintenance.

Function Description:

The Modway Bed, MOD-6218, is a piece of furniture designed to serve as a headboard for a bed. It is intended to be attached to an existing bed frame, providing a decorative and supportive backrest for the bed. The assembly process involves securing the headboard to its support stands and then attaching the entire unit to a compatible bed frame.

Important Technical Specifications:

The hardware required for assembling the headboard includes:

JCBC Bolt M6 x 35mm: 10 pieces
M6 Spring Washer: 10 pieces
M6 Flat Washer: 10 pieces
M4 Allen Key: 1 piece (provided for tightening)

The components of the MOD-6218 package include:

Headboard (A): 1 PC
HB Support (B): 2 PCS
Bed Frame (C): (DOES NOT INCLUDE WITH THE PURCHASE) - This indicates that the bed frame itself is a separate purchase and not part of the MOD-6218 package.

The estimated assembly time is approximately 20 minutes.

Usage Features:

Adjustable Headboard Height: Step 1.1 indicates that the pre-drilled support stand holes can be aligned with the headboard holes according to the user's desired headboard height, suggesting some degree of adjustability in the final height of the headboard.
Two-Adult Assembly Recommended: Due to the size and weight of the bed components, it is recommended that two adults assemble the bed. This ensures safety and ease of handling during the assembly process.
Carpeted/Padded Assembly Area: Assembling the bed on a carpeted or padded area is advised to prevent damage to the furniture or the floor during assembly.
Provided Tools: The M4 Allen Key is provided with the package, eliminating the need for users to supply their own tools for tightening the bolts.
Compatibility with Bed Frame: The headboard is designed to be attached to a separate bed frame (component C), which is not included with the MOD-6218 purchase. This implies that the user must have a compatible bed frame to complete the full bed setup.

Maintenance Features:

Periodic Tightening of Connections: The manual explicitly states, "Note: Hardware may loosen over time. Periodically check that all connections are tight." This is a crucial maintenance instruction to ensure the stability and longevity of the assembled headboard. Users are advised to save the provided tools for this purpose.
Loose Assembly First: Step 5 suggests assembling all components loosely until advised to tighten. This allows for easier alignment and adjustment during the initial stages of assembly, reducing the risk of misalignment or stripped screws.
Retention of Packaging and Instructions: Users are advised not to throw away the packaging or instructions until all components and hardware have been checked and the furniture is fully assembled. This ensures that all parts are accounted for and that the instructions are available for reference during assembly or future maintenance.
Safe Disposal of Packaging: The manual encourages environmentally friendly disposal of packaging once assembly is complete.
Keeping Fittings Out of Reach of Children: This is a safety precaution, ensuring that small hardware components are not accessible to children.