modway MOD-6219 - User Manual

To Next Page

MOD-6219

Thank you for purchasing the MODWAY BED!

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.

Customer Service 609-256-9000 | www.modway.com

01 of 03

2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approx assembly time: 20 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save tools that have been provided.

6. Please keep all fitting out of reach of children.

Components:

A HEADBOARD

1 PC

HB SUPPORT

2 PCS

BED FRAME

(DOES NOT INCLUDE

WITH THE PURCHASE)

Need help?

Do you have a question about the modway MOD-6219 and is the answer not in the manual?

The Modway MOD-6219 is a bed assembly, designed to provide a sturdy and aesthetically pleasing sleeping platform. This manual details the assembly process for the headboard and its attachment to a bed frame.

Function Description:

The primary function of the MOD-6219 is to serve as a headboard for a bed, offering structural support and enhancing the visual appeal of a bedroom. It is designed to be integrated with an existing or separately purchased bed frame. The headboard provides a backrest and defines the upper portion of the bed, contributing to the overall stability and design of the sleeping area.

Important Technical Specifications:

Components:
- A: HEADBOARD: 1 PC (The main decorative and structural element at the head of the bed.)
- B: HB SUPPORT: 2 PCS (These are the vertical supports that connect the headboard to the bed frame.)
- C: BED FRAME: (DOES NOT INCLUDE WITH THE PURCHASE) (This indicates that the bed frame itself is a separate item and not part of the MOD-6219 package, but is necessary for a complete bed assembly.)
Hardware for Headboard Assembly (Step 1):
- 1: JCBC BOLT M6 x 35mm: 10 PCS (These are the primary fasteners used to secure the HB Supports to the Headboard.)
- 2: M6 SPRING WASHER: 10 PCS (These washers provide tension and help prevent bolts from loosening over time.)
- 3: M6 FLAT WASHER: 10 PCS (These washers distribute the load of the fastener, protecting the material surface.)
- 4: M4 ALLEN KEY: 1 PC (The tool provided for tightening the JCBC bolts.)
Hardware for Attaching Headboard to Bed Frame (Step 2):
- The same types of hardware (JCBC Bolt, M6 Spring Washer, M6 Flat Washer, M4 Allen Key) are used, but in quantities of 3 each for the bolts and washers per side, for a total of 6 bolts and 6 washers. This suggests that the connection points to the bed frame are fewer but equally robust.
Approximate Assembly Time: 20 minutes.

Usage Features:

Two-Adult Assembly Recommended: Due to the size and weight of the bed components, the manual strongly recommends assembly by two adults. This ensures safety and ease of handling during the process.
Assembly Area Recommendation: It is advised to assemble the bed on a carpeted or padded area in the room where it is intended to be used. This protects both the furniture components and the flooring from potential damage during assembly.
Tool Usage: Only the provided or recommended tools (M4 Allen Key) should be used. This prevents damage to the hardware and components that might occur from using incorrect tools.
Adjustable Headboard Height: Step 1.1 indicates that the pre-drilled support stand holes should be aligned over the pre-drilled headboard holes according to the "desired headboard height." This suggests a degree of adjustability in how high the headboard sits relative to the bed frame, allowing for customization based on user preference or mattress thickness.
Loose Assembly First: The manual advises assembling all components loosely until instructed to tighten. This allows for easier alignment of parts and prevents stripping of threads or misalignment before final securing.
Integration with Bed Frame: The headboard is designed to be securely attached to a bed frame (Component C), which is not included. This modular design allows users to pair the headboard with a bed frame of their choice, provided it has compatible attachment points.

Maintenance Features:

Periodic Tightening: The manual explicitly states, "Note: Hardware may loosen over time. Periodically check that all connections are tight." This is a crucial maintenance instruction, emphasizing the need for regular inspection and re-tightening of all bolts to ensure the long-term stability and safety of the bed.
Retention of Tools: Users are advised to save the provided tools (M4 Allen Key) for future tightening needs, reinforcing the importance of periodic maintenance.
Packaging and Instruction Retention: It is recommended not to discard the packaging or instructions until all components are checked, hardware is verified, and the furniture is fully assembled. This ensures that all necessary information and parts are available throughout the assembly process and for future reference.
Safe Disposal of Packaging: The manual encourages environmentally friendly disposal of packaging, promoting responsible waste management.
Child Safety: "Please keep all fitting out of reach of children" is a standard safety precaution, particularly important for small hardware components that could pose a choking hazard.