modway MOD-5535 User Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 6
MOD-5535/5536/5537 HEADBOARD
Hardware:
Component:
A
Bolt M6x20mm x4
B
Arc Washer M6 x4
C
Allen Wrench M5 x1
1
Headboard x1
2
Low Post x2
Thank you for purchasing the MOD-5535/5536/5537 HEADBOARD！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the headboard, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approx assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
1
2
2
(Style may vary)

modway MOD-5535 Specifications

General

Brand	modway
Model	MOD-5535
Category	Indoor Furnishing
Language	English

Summary

Headboard Assembly Steps

Step 1: Assemble Headboard Unit

Assemble the headboard by inserting the low post into the headboard and securing with bolts and washers.

Step 2: Position Assembled Headboard

Carefully turn the assembled headboard upright with the assistance of two adults.

Connecting Headboard to Bed Frame - Option 1

Option 1: Step 1 - Secure Headboard

Line up bed frame holes with headboard, secure using specified bolts, washers, and nuts.

Option 1: Step 2 - Position Bed

Carefully position the assembled bed in its desired location with the help of four adults.

Connecting Headboard to Bed Frame - Option 2

Option 2: Step 1 - Secure Headboard

Align bed frame holes with headboard, then attach using specified bolts, washers, and nuts.

Option 2: Step 2 - Position Bed

Carefully move the assembled bed to the intended location, requiring four adults for assistance.