Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 6
Ax4 Bx4 Cx1
STEP 1:
Insert Low Post (2) into Headboard (1) as shown.
Attach by using Arc Washer (B) and Bolt (A) from the holes on the back of Low Post (2) and Headboard (1).
Use Allen Wrench (C) to tighten Bolts (A) clockwise until secure at this step.
Hardware & Tool required
STEP 2:
Assembly is completed. The headboard is ready to use now!
NOTE: Hardware may loosen over time. Periodically check that all connections are tight.
Carefully turn up the assembled Headboard (1) by two adults.
B
ac
k
wit
h
holes
Back
1
2
A
1
B
A
B
C
2
2
MOD-5535/5536/5537 HEADBOARD
To Next Page
Loading...
