modway MOD-5468 User Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3
MOD-5468 FULL BED FRAME
Hardware:
Component:
A
Bolt M8x25mm x16
B
C
Bolt M8x20mm x4
D
Allen Wrench M5 x1
1
Long Board x2
Thank you for purchasing the MODWAY FULL BED FRAME！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bed frame, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approx assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
Bolt M8x35mm x4
E
Open Wrench x1
F
Side Plastic Cover x24
2
Short Board x2
3
Leg x4
5
Support Leg x2
3
4
Stretcher x1
6
Slat x24
G
Center Plastic Cover x12
H
Nut M8 x4
1
1
2
2
3
3
3
5
4

modway MOD-5468 Specifications

General

Brand	modway
Model	MOD-5468
Category	Indoor Furnishing
Language	English

Summary

General Advice and Precautions

Before You Start

Provides essential advice for a smooth and safe assembly process, including reading instructions and preparation.

Bed Frame Assembly Steps

Step 1: Prepare Frame Components

Instructions for positioning and connecting the long boards, short boards, and legs for the bed frame.

Step 2: Attach Boards to Legs

Guides the user in securing the long and short boards to the legs using bolts and an Allen wrench.

Step 3: Add Stretchers and Support Legs

Details on attaching stretchers and support legs to the assembled frame using bolts and nuts.

Step 4: Install Slats

Instructions for inserting plastic covers and attaching the slats to the main bed frame structure.