modway MOD-5534 User Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 6
MOD-5534 TWIN HEADBOARD
Hardware:
Component:
A
Bolt M6x20mm x4
B
Arc Washer M6 x4
C
Allen Wrench M5 x1
1
Headboard x1
2
Low Post x2
Thank you for purchasing the MODWAY TWIN HEADBOARD！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then foll ow the simple step-by-step
instructions.
2.Owing to the size and weight of the headboard, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Appro ximately
a
ssembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instructio n until you h ave checked
a
l
l the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
1
2
2

modway MOD-5534 Specifications

General

Product Type	Accent Chair
Material	Fabric
Frame Material	Wood
Dimensions	32.5"L x 32"W x 37.5"H
Upholstery Material	Polyester
Leg Material	Rubberwood
Assembly Required	Yes
Category	Indoor Furnishing
Type	Chair

Summary

Product Assembly Advice

Headboard Unit Assembly

Attach Headboard to Low Posts

Connect the headboard to the low posts using provided hardware.

Position Assembled Headboard

Carefully turn the assembled headboard upright for placement.

Connect Headboard to Bed Frame (Option 1)

Secure Headboard to Bed Frame (Option 1)

Attach the headboard to the bed frame using bolts, washers, and nuts.

Position Assembled Bed (Option 1)

Move the fully assembled bed to its final location.

Connect Headboard to Bed Frame (Option 2)

Secure Headboard to Bed Frame (Option 2)

Attach the headboard to the bed frame using bolts, washers, and nuts.

Position Assembled Bed (Option 2)

Move the fully assembled bed to its final location.