modway MOD-6216 - User Manual

To Next Page

MOD-6216

Thank you for purchasing the MODWAY BED!

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.

Customer Service 609-256-9000 | www.modway.com

01 of 03

2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approx assembly time: 20 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save tools that have been provided.

6. Please keep all fitting out of reach of children.

Components:

HEADBOARD

1 PC

B HB SUPPORT

2 PCS

BED FRAME

(DOES NOT INCLUDE

WITH THE PURCHASE)

Need help?

Do you have a question about the modway MOD-6216 and is the answer not in the manual?

The Modway MOD-6216 is a bed frame designed for home assembly, featuring a headboard and support structure. The manual provides comprehensive instructions for assembling the bed, emphasizing ease of construction and the need for two adults due to its size and weight. The estimated assembly time is approximately 20 minutes.

Function Description:

The Modway MOD-6216 serves as a foundational bed frame, providing support for a mattress and creating a complete bed unit. Its primary function is to securely hold a mattress at a desired height and offer a headboard for aesthetic appeal and comfort. The design allows for the headboard to be attached to a separate bed frame, indicating a modular approach where the headboard is a distinct component that integrates with a compatible bed frame (sold separately).

Important Technical Specifications:

Model Number: MOD-6216
Components:
- A: HEADBOARD: 1 PC
- B: HB SUPPORT: 2 PCS (These are the vertical supports that connect the headboard to the bed frame)
- C: BED FRAME: (DOES NOT INCLUDE WITH THE PURCHASE) - This explicitly states that the bed frame itself is not part of the MOD-6216 package, implying the MOD-6216 refers specifically to the headboard and its supports.
Hardware for Headboard Assembly (Step 1):
- 1: JCBC BOLT M6 x 35mm: 10 PCS
- 2: M6 SPRING WASHER: 10 PCS
- 3: M6 FLAT WASHER: 10 PCS
- 4: M4 ALLEN KEY: 1 PC (Provided for tightening fasteners)
Hardware for Attaching Headboard to Bed Frame (Step 2):
- JCBC Bolt [1]
- M6 Spring Washer [2]
- M6 Flat Washer [3]
- Allen Key [4]
- Note: The quantity of these fasteners for Step 2 is specified as "3x" for each type (bolt, spring washer, flat washer) per side, for a "thicker bed frame." This suggests that the connection points are robust and designed to accommodate various bed frame thicknesses.

Usage Features:

Assembly: The bed frame is designed for self-assembly. The manual recommends two adults for assembly due to the size and weight of the components. Assembly should be performed on a carpeted or padded area to prevent damage.
Tools: Only the provided M4 Allen Key (or recommended tools) should be used for assembly. This ensures proper tightening and prevents damage to the fasteners or components.
Headboard Height Adjustment: Step 1.1 indicates that the pre-drilled support stand holes can be aligned over the pre-drilled headboard holes "according to your desired headboard height." This suggests a degree of adjustability in how high the headboard sits relative to the bed frame, allowing users to customize the bed's appearance or accommodate different mattress thicknesses.
Modular Design: The explicit mention that the "BED FRAME (DOES NOT INCLUDE WITH THE PURCHASE)" for component C highlights that the MOD-6216 product specifically refers to the headboard and its support system. This means it is designed to be attached to an existing or separately purchased bed frame, offering flexibility for consumers who may already have a bed frame or wish to choose one independently.
Component Identification: Components are clearly labeled with letters (A, B, C) and hardware with numbers (1, 2, 3, 4) in the diagrams and lists, simplifying the assembly process.

Maintenance Features:

Periodic Tightening: The manual includes a crucial note under Step 1.2: "Note: Hardware may loosen over time. Periodically check that all connections are tight." This advises users to regularly inspect and re-tighten the fasteners to maintain the structural integrity and stability of the bed frame. The provided Allen Key should be saved for this purpose.
Packaging Retention: Users are advised not to discard the packaging or instructions until all components are checked, hardware is accounted for, and the furniture is fully assembled. This is important for troubleshooting or if parts are missing.
Safe Disposal: Once assembly is complete and all components are verified, the packaging should be disposed of in a "safe environmentally friendly way."
Child Safety: "Please keep all fitting out of reach of children" is a general safety precaution, particularly important during assembly when small hardware pieces are present.
Customer Support: Contact information for customer service (609-256-9000) and the company website (www.modway.com) is provided on each page, allowing users to seek assistance for any issues or queries.