Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 3
MOD-5467 TWIN BED FRAME
Cx24
STEP 3:
Hardware & Tool required
1
4
4
C
2
1
2
Carefully turn over the assembled Long Boards (1), Short Boards (2) and Legs (3).
Insert 2 piece of Side Plastic Cover (C) into each end of Slat (4) as shown.
Insert the assembled Side Plastic Covers (C) into the corresponding holes on Long Board (1) as shown.
Repeat the same steps for remaining 11 pieces Slats (4).
Assembly is complete. Your bed frame is ready to be enjoyed now!
C
To Previous Page
Loading...
