Moen 7402 Series - User Manual

Installation Guide
Guía de Instalación
Guide d’installation
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen recommends
the use of these helpful tools.
HERRAMIENTAS ÚTILES
Para que el cambio de la llave sea fácil y seguro, Moen le
recomienda usar estas útiles herramientas.
OUTILS UTILES
Par mesure de sécurité et pour faciliter l’installation, Moen
suggère l’utilisation des outils suivants.
Please Contact Moen First
For Installation Help, Missing or
Replacement Parts
(USA
)
1-800-BUY-MOEN (1-800-289-6636)
Mon - Fri 8:00 AM to 7:00 PM, Eastern
Sat. 9:00 AM to 3:00 PM Eastern
WWW.MOEN.COM
(Canada)
1-800-465-6130
Mon - Fri 7:30 AM to 7:00 PM, Eastern
WWW.MOEN.CA
Por favor, contáctese primero con Moen
Para obtener ayuda de instalación, piezas
faltantes o de recambio
011 52 (800) 718-4345
Lunes a viernes de 8:00 a 20:00 hs.
(Costa Este)
S
áb. 8:00 a 18:30 hs. (Costa Este)
WWW.MOEN.COM.MX
Veuillez d’abord contacter Moen
En cas de problèmes avec l’installation, ou pour
obtenir toute pièce manquante ou de rechange
1-800-465-6130
Du lundi au vendredi :
de 7 h 30 à 19 h, HE
WWW.MOEN.CA
ONE HANDLE PULLDOWN KITCHEN FAUCET
7402 SERIES
MEZCLADORA MONOMANDO RETRÁCTIL
PARA COCINA SERIE 7402
ROBINET DE CUISINE À BEC RÉTRACTABLE
ET UNE POIGNÉE SÉRIE 7402
INS10507 - 11/15
CAUTION — TIPS FOR REMOVAL OF OLD FAUCET: Always turn water supply OFF before
removing existing faucet or disassembling the valve. Open faucet handle to relieve water pressure
and ensure that complete water shut-o has been accomplished.
PRECAUCIÓN — CONSEJOS PARA CAMBIAR LA LLAVE MEZCLADORA:
Siempre CIERRE la toma
de agua antes de quitar la llave existente o desmontar la válvula. Abra la llave para liberar la presión, y
asegúrese de que esté bien cerrada el agua.
ATTENTION  SUGGESTIONS POUR ENLEVER L’ANCIEN ROBINET:Toujours couper
l’alimentation en eau avant d’enlever ou de démonter le robinet. Ouvrir le robinet pour libérer la
pression d’eau et pour s’assurer que l’alimentation en eau a bien été coupée.

Summary

Getting Started

Parts Identification

Component Parts List

Detailed list and identification of all faucet components.

Initial Installation Steps

Step 1 A: Mounting Faucet Body to Sink

Instructions for mounting the faucet body onto the sink.

Step 1 B: Mounting Faucet Body with Deck Plate

Instructions for mounting the faucet body with deck plate to sink.

Installation - Support and Securing

Step 2: Slide Support Bracket and Mount Washer

Guides for sliding support bracket and mounting washer onto faucet body.

Step 3: Tighten Mounting Nut

Instructions for tightening the mounting nut using the installation tool.

Step 4: Attach Hose Protector

Step 5: Insert Pulldown Hose

Installation - Hose and Weight

Step 6: Connect Pullout Hose and Adapter

Steps to remove cap, connect pullout hose to adapter, and test.

Step 7: Install Hose Weight

Instructions for locating mark and installing hose weight on pulldown hose.

Installation - Water Lines and Flushing

Step 8: Attach Supply Lines

Connecting flexible supply lines to hot and cold water stops.

Step 9: Flush Faucet

Procedure to flush faucet for 15 seconds after connecting supply lines.

Step 11: Attach Spray Wand

Spray Wand Operation

Switching Between Stream and Spray Modes

Warranty Information

Moen Limited Lifetime Warranty Details

Moen 7402 Series Specifications

General

Model Number	7402
Finish	Chrome
Handle Type	Lever
Number of Handles	2
Flow Rate	1.2 GPM
Valve Type	Ceramic Disc
ADA Compliant	Yes
Warranty	Limited Lifetime
Product Type	Faucet
Mounting Type	Deck Mount