To Next PageTo Next PageWhat to do if batteries are dead in Moen MOTIONSENSE WAVE 7594EWSRS?
To resolve dead batteries in the battery holder of your Moen Plumbing Product, unplug the battery holder cable and replace the batteries with new AA alkaline batteries.
How to plug in power cable in Moen MOTIONSENSE WAVE 7594EWSRS?
Ensure the power cable is fully plugged into the control box of your Moen Plumbing Product by firmly pushing the power cable into the control box.
Why is the light blinking on my Moen MOTIONSENSE WAVE 7594EWSRS?
If the light on your Moen Plumbing Product is blinking, this could be due to low battery voltage, dead batteries, or the use of rechargeable batteries. Replace the batteries with new AA alkaline batteries to ensure proper faucet functionality.
What to do if water does not flow and light is on for Moen MOTIONSENSE WAVE 7594EWSRS Plumbing Product?
If water is not flowing from your Moen Plumbing Product and the light is on, the water supplies may not be turned on. Turn on the water supplies to resolve this issue.
Why does the water keep flowing and not turn off in my Moen MOTIONSENSE WAVE 7594EWSRS Plumbing Product?
If water keeps flowing from your Moen Plumbing Product and does not turn off, ensure that the handle is not in the open position and close it fully. Also, check if the battery holder cable became unplugged while the faucet was running, and if so, unplug the battery holder cable fully.
How to fix low water flow in Moen MOTIONSENSE WAVE 7594EWSRS Plumbing Product?
If you're experiencing low water flow (hot, cold, or both) from your Moen Plumbing Product, or only hot or cold water flows, the water supplies may not be fully turned on. Ensure that all water supplies are turned on. Also, check for pinched or kinked hoses and make sure they are not obstructed. Lastly, the filters might be clogged, so cleaning both filters is recommended.
Why is the sensor not functioning on my Moen MOTIONSENSE WAVE 7594EWSRS?
If the sensor on your Moen Plumbing Product is not functioning, it could be deactivated. Reactivate the sensor. Also, ensure that the handle is fully closed, as a slightly open handle can interfere with sensor operation. Finally, make sure there are no objects within 8 inches of the sensor, as this can also cause it to malfunction.
How to fix reversed hot and cold water flow on Moen MOTIONSENSE WAVE 7594EWSRS Plumbing Product?
If the handle position for hot and cold water flow is reversed on your Moen Plumbing Product (cold forward), the hot and cold hoses may be installed in reversed order. If the hoses are reversed at the wall stops, turn off the supplies and connect the hot supply hose to the hot stop and the cold supply hose to the cold stop. If the hoses are reversed at the control box, turn off the supplies and connect the hot supply hose to the hot side of the control box and the cold supply hose to the cold side of the control box.
What happens if the wall switch is OFF when using AC adapter with power splitter for Moen MOTIONSENSE WAVE 7594EWSRS?
If you are using an AC adapter with a power splitter and the wall switch for the power outlet is off, the faucet will function normally until battery power is depleted. Turn the wall switch on to ensure power at the outlet. If the wall switch remains off, the faucet will continue to function normally until the battery power is depleted.
What to do if wall switch is OFF when using AC adapter for Moen MOTIONSENSE WAVE 7594EWSRS Plumbing Product?
If you are using an AC adapter only and the wall switch for the power outlet is off, turn the wall switch on to ensure power at the outlet. Clear the area for proper startup.
General| Finish | Spot Resist Stainless |
|---|---|
| Flow Rate | 1.5 GPM |
| ADA Compliant | Yes |
| Handle Style | Lever |
| Number of Handles | 1 |
| Connection Size | 3/8 inches |
| Connection Type | Compression |
| Supply Lines Included | Yes |
| Sensor Activation | Wave Sensor |
| Installation Type | Deck Mount |
| WaterSense Certified | Yes |
| Type | Faucet |
| Collection | MOTIONSENSE |
| Power Source | Battery or AC Adapter |
| Features | Motion Sensor |
Provides contact details for installation help, missing parts, and customer service.
Key safety warnings and tips to follow before removing the old faucet.
Steps for installing the faucet body, deck plate, and securing it to the sink.
Procedure to reset the faucet's electronic system to resolve operational issues.
Table detailing common symptoms, probable causes, and recommended actions for troubleshooting.
