Moen S1311 Series User Manual

9 - 3/16"
(233mm)
3 - 1/8"
(79mm)
DESCRIPTION
• Metal spray face and shell
• Brass swivel ball assembly
• Available in various finishes identified by suffix
OPERATION
• Self pressurizing design that provides strong performance
regardless of line pressure
• Two function, rain and rinse: operate lever to select
FLOW
• 2.5 gpm max. (9.5 L/min) max
STANDARDS
• Third party certified to CSA B125, ASME A112.18.1, and all
applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Spec i fi ca tions
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/11
9" Two Function Rainshower
(Showerhead Only)
Models: S1311 series
EP Suffix Models Only
S1311EP, S1311EPBN,
S1311EPORB

Moen S1311 Series Specifications

General

Brand	Moen
Model	S1311 Series
Category	Plumbing Product
Language	English

Summary

Product Description and Features

Product Description

Details the metal spray face, shell, and brass swivel ball assembly, available in various finishes.

Product Operation

Highlights self-pressurizing design and two-function operation (rain and rinse) controlled by a lever.

Flow Rate

Specifies the maximum flow rate as 2.5 gpm (9.5 L/min).

Certifications and Standards

Confirms third-party certification to CSA B125, ASME A112.18.1, and referenced applicable requirements.

Warranty Information

Details lifetime limited warranty for leaks, drips, and finish defects, plus a 5-year warranty for commercial use.

Model Identification

Rainshower Model

Identifies the product as a 9" Two Function Rainshower (Showerhead Only).

Series and Specific Models

Lists the main model series as S1311 and specific EP suffix models: S1311EP, S1311EPBN, S1311EPORB.

Critical Dimensions