Moen Waterhill S112 - User Manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 2/11
WATERHILL™
10” Rainfall Showerhead
Models: S112 series
FAUCET DESCRIPTION
• Metal spray face and shell with various finishes identified by suffix
• Brass swivel ball assembly
OPERATION
• Self pressurizing design provides strong performance regardless of
line pressure
• Single spray function
FLOW
• Showerhead designed to deliver 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 2.0 gpm (7.76 L/min) at 80 psi
STANDARDS
• Third party certified to meet ASME A112.18.1/ CSA B125.1 and all
applicable requirements referenced therein
• EP suffix models are IAPMO Green listed and third party certified
to WaterSense®
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
10"
(254mm)
2
7
/8" (73mm)
Models: S112EP series

Moen Waterhill S112 Specifications