Moen WATERHILL S411 series User Manual

7-3/8"
(187mm)
4-5/32"
(106mm)
5-3/8"
(137mm)
9" (229mm)
Full Open
8-1/4"
(210mm)
CLOSED
*7.3"
Vessel Extension x2
14.9"
FULL OPEN
13.15"
CLOSED
2-1/2" (64mm)
MAX. DECK
THICKNESS
LIFT ROD
SINGLE HOLE
ESCUTCHEON DIA.
2-23/32" (69mm)
OPTIONAL
ESCUTCHEON
6-1/4" x 2-1/2"
(159mm) x (64mm)
Wall
2-1/2" min
for lift rod
operation
30-1/2"
(775mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8” compression fittings
• Includes metal pop-up waste assembly
• Includes optional 3 hole deck plate (escutcheon)
• Designed to be installed through 1, 1-1/8” min. dia. hole
OPERATION
• Pivot action lever style handle
• Features a pivoting spout with self-centering feature
• Temperature controlled through 100° arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
WATERHILL™
Single-Handle Lavatory Faucet
Models: S411 series
* Use S115 Extension Kit forVessel Sink Applications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Spec i fi ca tions
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/11
There is more than 1 version of this model.
Page down to identify the version you have.

Moen WATERHILL S411 series Specifications

General

Collection	Waterhill
Handle Type	Lever
ADA Compliant	Yes
WaterSense Certified	Yes
Lifetime Limited Warranty	Yes
Finish	Chrome

Summary

Product Specifications

Product Identification

Identifies the specific Moen faucet model and type.

Model Series

Lists the model series applicable to this specification sheet.

Vessel Sink Installation Accessory

Notes the use of an extension kit for vessel sink installations.

Product Description

Details the faucet's construction, finishes, and installation requirements.

Faucet Operation

Describes the lever handle, spout movement, and temperature control.

Flow Rate Specification

Specifies the maximum flow rate of the faucet.

Cartridge Type

Identifies the type of cartridge used in the faucet.

Certifications and Compliance

Lists third-party certifications and compliance with safety standards.

ADA Accessibility

Indicates compliance with ADA standards for lever handle.

Warranty Information

Outlines the limited lifetime warranty for residential use.

Critical Dimensions

Provides key measurements for faucet installation and clearance.