Need help?Do you have a question about the MoErgo Glove80 and is the answer not in the manual?
Guide to positioning the keyboard and oneself for optimal ergonomic typing posture.
Instructions on how to securely attach the detachable palm rests to the Glove80 keyboard.
Explanation of the primary keyboard layer active upon powering on the Glove80.
Details the Magic Layer for controlling Glove80 features like RGB and BT profiles.
Explains the RGB LED indicators for lock key status on the Glove80.
Describes how RGB LEDs indicate the currently active keyboard layout layer.
Explains the RGB indicators for Bluetooth profiles and USB connection status.
Overview of wireless connectivity options for Glove80 via Bluetooth Low Energy.
How to choose between Bluetooth profiles and USB for output.
Steps to remove a Bluetooth pairing from Glove80 and the host device.
Instructions on how to charge the Glove80's internal batteries via USB-C.
Details automatic battery saving features for the RGB underglow lighting.
Explains how RGB underglow dims or turns off to conserve battery life.
Information on modifying the keyboard layout to suit user preferences and needs.
Introduction to the web-based tool for graphically designing custom Glove80 layouts.
Alternative method to enter bootloader mode if firmware is corrupted or keys are unassigned.
Explains how tenting reduces forearm pronation for improved comfort.
Guide on adjusting the keyboard's tenting angle for personalized ergonomics.
Instructions for increasing the tenting angle of the keyboard halves.
Details the ergonomic design features of the Glove80 keyboard.
Specifies the number of keys and layout options for the Glove80.
Outlines the wireless and wired connection interfaces supported by Glove80.
Information on the firmware and configuration tools available for Glove80.
Lists the hardware components and specifications of the Glove80.
Details the customization options for the Glove80, like custom mounts.
Provides the physical dimensions and weight of the Glove80 keyboard.
Guide to building custom ZMK firmware through a GitHub repository.
Procedures for attaching the Glove80 to custom mounting solutions.
Diagrams detailing the M4 stud locations for custom mounting.
Steps for preparing the quick-release tripod mounting plate for attachment.
Information on connecting external electronics to the Glove80's GPIO pins.
Detailed instructions for replacing and soldering key switches on the Glove80.
FCC compliance information for the Glove80 device in the USA.
Industry Canada compliance information for the Glove80 device in Canada.
General| Number of Keys | 80 |
|---|---|
| Keycap Material | PBT |
| Hot-swappable | Yes |
| Firmware | ZMK |
| Case Material | Plastic |
| Layout | Split ergonomic |
| Connectivity | USB-C |
| RGB | Per-key RGB |
| Type | Ergonomic mechanical keyboard |
| Battery | Rechargeable |
| Switch Type | Hot-swappable mechanical (Kailh Choc V1 compatible) |
| Battery Life | Up to 1 month (depending on usage) |
To Next Page