SpectraMax ABS and SpectraMax ABS Plus Microplate Spectrophotometers User Guide
10 5065390 C
Note: Use high quality support frames or holders when you use strip-wells. You should
fill the frame or holder with empty strips to avoid warping.
Shake
To mix of the contents of the wells, you can define settings to shake the plate linearly along
the long axis at preset intervals.
Endpoint read type: Settings allow for the shaking of the plate for a user-defined number
of seconds and then reading at all selected wavelengths.
Kinetic read type: Settings allow for the shaking of the plate number for a user-defined
number of seconds before the initial read, and/or for a user-defined number of seconds
before each subsequent read.
Note: To enhance accuracy, the use of shake is recommended for ELISAs and other
solid-phase, enzyme-mediated reactions.