Molecular Devices SpectraMax iD3 Installation Guide

SpectraMax iD3 Multi-Mode Microplate Reader Installation Guide
9 5054744 C
Removing the Transport Locks
CAUTION! The instrument can be damaged if the transport locks are not removed
before the instrument is powered on.
Transport locks are placed on the transport slide and the plate drawer to protect the
instrument during shipment.
Illustration PartNumber Description
YW 000 006 Hex key, 2.0mm
YW 000 012 Holex HEXAGONballhead bolt driver 3 mm
Required Tools
CAUTION! Do not touch or loosen screws or parts other than those specifically
designated in the instructions. Doing so could cause misalignment and possibly void
the warranty.
To remove the transport lock:
1. Remove the black cover from the travel lock opening in the center on the rear of the
instrument. This cover prevents high dark counts for Luminescence reads and will be put
back in after the following step.

Molecular Devices SpectraMax iD3 Specifications

General

Brand	Molecular Devices
Model	SpectraMax iD3
Category	Laboratory Equipment
Language	English