What to do if a motion problem occurs because of object blocking movement in Molecular Devices StakMax?
If the Molecular Devices Laboratory Equipment encounters a motion problem due to an object blocking movement or jaws snapping shut after opening, check for any obstructions and then realign the instrument.
What to do if a problem occurred with the X axis in Molecular Devices Laboratory Equipment?
If the Molecular Devices Laboratory Equipment displays an error related to the X axis, it may be due to the plate not being properly gripped or not being present, which prevents a state change on the edge detect switch. To resolve this, ensure the plate is correctly gripped and realign the instrument. If the problem continues, contact Molecular Devices Technical Support at +1-800-635-5577.
What to do if a motion problem occurred because the moving gripper to upward position did not find home in Molecular Devices StakMax?
If the Molecular Devices Laboratory Equipment encounters a motion problem because the moving gripper to upward position did not find home, check for any obstructions blocking movement and then realign the instrument.
What to do if a motion problem occurred because axis is already in motion in Molecular Devices StakMax?
If the Molecular Devices Laboratory Equipment encounters a motion problem because the axis is already in motion, press the Power/Reset button.
How to fix “Object reference not set to an instance of an object” error in Molecular Devices StakMax?
If the Molecular Devices Laboratory Equipment displays the error message “Object reference not set to an instance of an object”, open the communication server options and disable polling the COM port where the stacker is connected.
What to do if a Problem occurred with the EPROM because EPROM space is larger than portion of FLASH memory allocated in Molecular Devices StakMax Laboratory Equipment?
If the Molecular Devices Laboratory Equipment displays an EPROM error because EPROM space is larger than portion of FLASH memory allocated, call Molecular Devices Technical Support at +1-800-635-5577.
What to do if a Problem occurred with the EPROM because EPROM did not have proper checksum in Molecular Devices Laboratory Equipment?
If the Molecular Devices Laboratory Equipment displays an EPROM error because EPROM did not have proper checksum and cannot be trusted, call Molecular Devices Technical Support at +1-800-635-5577.
What to do if a Problem occurred with the EPROM in Molecular Devices Laboratory Equipment?
If the Molecular Devices Laboratory Equipment displays an EPROM error, call Molecular Devices Technical Support at +1-800-635-5577.
What to do if error occurred, according to Molecular Devices StakMax Laboratory Equipment?
If the Molecular Devices Laboratory Equipment displays an error, call Molecular Devices Technical Support at +1-800-635-5577.
How to fix error during reset on Molecular Devices StakMax?
If the Molecular Devices Laboratory Equipment shows an error during reset, it might be because the homing routine couldn't detect a state change on the home flag. This is likely due to a sensor or flag problem. Try pressing the Power/Reset button to resolve this.
General| Brand | Molecular Devices |
|---|---|
| Model | StakMax |
| Category | Laboratory Equipment |
| Language | English |
Guidelines for safe operation of the StakMax instrument.
Information on warning labels attached to the StakMax instrument.
Description of the interrupt button's function and location.
Details and images of various labels on the StakMax instrument.
Overview of the manual's purpose and content.
Comprehensive guide to installing the StakMax system.
Procedure for unpacking the StakMax microplate handling system.
Instructions for connecting the baseplate to different instruments.
Steps for installing or replacing the instrument's barcode reader.
Guide to installing the necessary USB driver for StakMax software.
Procedure for aligning the StakMax microplate handler's gripper.
Steps to verify the operational status of the gripper.
List of components included in the StakMax microplate handler package.
Steps to connect the baseplate for the SpectraMax L reader.
Steps to connect the baseplate for the AquaMax washer.
Steps to connect the baseplate for the SpectraMax Paradigm instrument.
Instructions for installing the stand for the StakMax microplate handler.
Procedure for side-by-side installation of the handler stand.
Procedure for front installation of the handler stand.
Steps to install the plate drawer protection stand.
Steps for mounting the StakMax microplate handler.
Procedure to adjust the height of the plate drawer protection stand.
Instructions for connecting power and USB cables.
Automatic steps to install the StakMax driver on Windows XP.
Manual steps to install the StakMax driver on Windows XP.
Automatic steps to install the StakMax driver on Windows 7.
Procedure to align the transfer position for SpectraMax Paradigm.
Instructions for turning the StakMax microplate handler on and off.
Procedure to launch and access the StakMax software interface.
Methods for loading microplates into the handler.
Method for continuously feeding plates into the handler.
Instructions for using the optional tool for magazine handling.
Instructions for using the tool to load single plates.
Overview of the StakMax software interface and functions.
Procedure to initiate a plate reading process.
How to manually stop a plate reading.
Function and use of the emergency stop button.
Manual plate movement from input stack to reader.
Manually moves a plate from reader to output stack.
Moves plates from output stack back to input stack.
Demonstrates plate movement between stacks.
Creating and using scripts to automate runs.
Resets the stacker to its initial startup state.
Configuration options for script editing, date/time, and barcoding.
Enabling and configuring barcode reading capabilities.
Settings for editing prompts in the script editor.
Feature to include date and time in file names for backup.
Procedures for aligning the stacker's gripper.
Displays details of the current run, including errors.
Accesses the StakMax Plate Handling System User Guide.
Steps to open the script editor within the StakMax software.
Explanations of available commands for scripting.
List and brief description of advanced scripting commands.
Guide to creating scripts using existing templates.
Steps to add new commands to a script.
Procedure to remove commands from a script.
Steps to reorder commands within a script.
How to check a script for syntax errors.
Implementing command repetition in scripts using Begin/End Repeat.
Instructions for saving created scripts.
Steps to print a script.
General maintenance overview for the StakMax microplate handler.
Recommended weekly cleaning procedures for the instrument.
Maintenance tasks performed as needed, like realignment.
Maintenance specific to the SpectraMax Paradigm instrument.
Procedure to detach the StakMax from its stand.
Steps to access detection cartridges on the SpectraMax Paradigm.
Instructions for opening the cartridge drawer.
Instructions for closing the cartridge drawer.
Re-alignment procedure for the microplate transfer position.
Contact information and procedures for technical assistance.
Table listing error codes, messages, descriptions, and solutions.
Details on plate compatibility and supported barcode libraries.
Information on compatible microplates and barcode libraries.
Dimensions, weight, power, and connectivity details of the system.
Visual representations and dimensions of the StakMax instrument.
To Next Page
