Molecular Devices StakMax - Return Plate; Restack

Operation
102 5016072 A
Return Plate
The Return Plate button manually moves one plate from the reader to
the output stack. You can use this command to clear a plate that was
left in the reader or to help determine if a component is out of sync.
Restack
The Restack button moves plates from the output stack to the input
stack. Specify the number of plates to restack. To move all of the
plates, leave the Number of Plates field blank or type 0 (zero). See
Figure 3-21.
Figure 3-21 The Restack Plates window.
StakMax-UG-5016072A.book Page 102 Friday, October 21, 2011 3:51 PM