Operation
84 5016072 A
5. Place the magazine in the stacker. See Figure 3-6.
Figure 3-6 Magazines in the StakMax
®
plate handler.
Continual Feed
You can use the StakMax microplate handler to manually feed up to 50
plates into the input or output stack. If you choose to read plates until
empty, you can continuously feed plates into the StakMax microplate
handler.
Note: Use the single plate loading tool if you are not using a
magazine to stack the microplates.
Note: Never place more than 50 plates in the input stack or allow
more than 50 plates to accumulate in the output stack.
StakMax-UG-5016072A.book Page 84 Friday, October 21, 2011 3:51 PM
To Next Page
Loading...
