What does 'reference gain check fail' mean for Molecular Devices SpectraMax M2e?
A 'reference gain check fail' error in Molecular Devices Laboratory Equipment could be due to a bad or disconnected pre-amp board or excessive stray light. The power-up check of the Reference amplifier's gain is out of tolerance.
What causes signal level saturation in Molecular Devices Laboratory Equipment?
Signal level saturation in Molecular Devices Laboratory Equipment during a cuvette read could be due to the cuvette door being open.
What does reference level saturation mean in Molecular Devices Laboratory Equipment?
Reference level saturation in Molecular Devices Laboratory Equipment during a cuvette read could be due to the cuvette door being open.
How do I fix 'error buffer overflow' on Molecular Devices SpectraMax M2e Laboratory Equipment?
An 'error buffer overflow' in Molecular Devices Laboratory Equipment means there are more than 65 errors in the buffer. You should clear the buffer.
What does 'can't find zero order' mean on Molecular Devices SpectraMax M2e Laboratory Equipment?
If the Molecular Devices Laboratory Equipment displays 'can't find zero order' on power-up, it means the grating motor could not find the zero-order home position.
General| Brand | Molecular Devices |
|---|---|
| Model | SpectraMax M2e |
| Category | Laboratory Equipment |
| Language | English |
Details on pathlength compensation technology and its correction methods.
Instructions for safely removing the instrument from its packaging.
Guidelines for placing, connecting, and initial setup of the instrument.
Steps for powering on, setting temperature, and loading samples.
Guidance on adjusting settings for optimal fluorescence detection.
Step-by-step instructions for replacing instrument fuses.
Procedure for manually opening the drawer in case of errors.
Lists error codes and their likely causes and remedies.
To Next Page
