molex TM42 - Description; Features; Technical Specifications; General Description

9
General Description
1.1 Description
The Molex Terminator is an easy to use tool for the termination of a variety of Molex crimp terminals.
Production flexibility is obtained through the use of simple interchangeable tooling. The tooling is
inexpensive, and unlike a modular applicator, all crimp height and terminal feed adjustments are located
in the press. The terminator die can be installed in the TM42, TM40 presses or Base Unit adaptor, and is
ideally suited for mid-volume bench operation.
The Molex T2 terminator is the newer version tool that allows for track adjustment. It contains the identical
perishable tooling as the Molex FineAdjust applicator. (Center carrier excluded)
1.2 Features
■
Flexible and inexpensive.
■
Enhanced crimping productivity.
■
Simple installation.
■
Quick release punches.
■
T2 terminator has standardized tooling with Molex FineAdjust Applicator.
■
Track Adjustment capabilities in the T2 terminators for improved control of the bellmouth size and cutoff
tab length.
1.3 Technical Specifications
Dimensions
Width - 127.0 mm (5.0”)
Depth - 44.0 mm (1.8”)
Height - 25.0 mm (1”)
Weight - 1.4 kg (3.0 lbs)