To Next PageTo Next Page
Need help?Do you have a question about the Monacor HPB-604 and is the answer not in the manual?
Describes the intended uses and capabilities of the car HiFi power amplifier.
Crucial safety warnings and precautions for installation and operation.
Advises on safe volume levels to prevent hearing damage and ensure driving awareness.
Covers choosing a stable mounting place and ensuring proper air circulation.
Identifies and explains the front panel controls and rear panel terminals of the amplifier.
Details connecting power supply, ground, REM, inputs, line output, and speakers for various modes.
Guides on selecting filters, adjusting crossover frequencies, levels, and bass boost.
Provides solutions for common issues like no sound, LED indicators, and protective circuits.
Describes the intended uses and capabilities of the car HiFi power amplifier.
Crucial safety warnings and precautions for installation and operation.
Advises on safe volume levels to prevent hearing damage and ensure driving awareness.
Covers choosing a stable mounting place and ensuring proper air circulation.
Identifies and explains the front panel controls and rear panel terminals of the amplifier.
Details connecting power supply, ground, REM, inputs, line output, and speakers for various modes.
Guides on selecting filters, adjusting crossover frequencies, levels, and bass boost.
Provides solutions for common issues like no sound, LED indicators, and protective circuits.
General| Channels | 4 |
|---|---|
| RMS Power Output | 4 x 60 W |
| Output power at 4 ohms | 4 x 60 W |
| Output power at 2 ohms | 4 x 90 W |
| Output power at 4 ohms bridge | 2 x 180 W |
| Frequency Response | 10 Hz - 30 kHz |
| Frequency Range | 10 Hz - 30 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| THD | < 0.05% |
| Peak Power Output | 480 W |
| Input Sensitivity | 0.2V - 6V |
| Input impedance | 10kΩ |
| Power supply | 12 V DC |
