Need help?Do you have a question about the Monacor LA-40 and is the answer not in the manual?
Controls for microphone, line input, tone, loop current, indicators, and headphone output.
Connectors for power supply, induction loop, signal sound switch, line input, and microphone input.
Explains the induction loop's function: magnetic field creation and reception by hearing aids or inductive receivers.
Instructions for placing the unit, attaching rubber feet, and positioning for optimal performance.
Guidance on laying the loop cable, optimal placement, and material considerations for the induction loop.
Details on connecting microphones to the MIC input and audio sources to the LINE IN input.
Information on triggering signal sounds and connecting the power supply unit to the amplifier.
Step-by-step guide for initial control settings, input level adjustment, and loop current configuration.
How to connect and use headphones to monitor the transmitted sound signal.
Fine-tuning the volume ratio between microphone and audio source, and adjusting tone controls.
Procedure for activating the signal sound function using an external momentary pushbutton.
To Next Page
General
