DFS Series Vent Free Fireplace
8
71D0532
Carefully select the best location for installation of your unvented replace. The following factors
should be taken into consideration.
• Clearance to side wall, ceiling, woodwork and window or other combustibles. Refer to “Clear-
ances” section on Page 9. Minimum clearances to combustibles
• Location must not be affected by drafts caused by kitchen exhaust fans, ceiling fans, return
air registers for forced air furnaces / air conditioners, windows or doors.
• Installation must provide adequate ventilation and combustion air.
•
• Location should be out of high trafc areas and away from furniture and draperies due to
heat from rebox.
• Never obstruct the front opening of the unvented replace or restrict the ow of combustion
and ventilation air.
• Minimize modications to existing construction. Refer to Figure 3 below for location sugges-
tions.
• Do not install in the vicinity where gasoline or other ammable liquids may be stored. The
unvented rebox must be kept clear and free from the combustible materials.
FP2440
fireplace locations
FP2440
To Next Page
Loading...
