Monitor Audio Bronze W10

ENGLISH
4QFDJˌDBUJPO
Bronze W10
System Format
Active sub-woofer system – Auxiliary Bass Radiator (ABR) loading.
18mm MDF cabinet (CARB2 approved)
Low Frequency Limit 34Hz (-6dB)
Upper Frequency Limit 7BSJBCMFr)[!E#0DUBWF
Amplifier Power Output 220W @ < 1% THD+N
Amplifier Classification Class D amplifier with Switch mode power supply (SMPSU)
Bass EQ Switch .VTJD.PWJF*NQBDU
Phase Control 0 & 180 degrees
Auto Sensing Line Level >3.5mV
Input Level Requirements Standby after approximately 15 minutes if no signal sensed
Driver Compliment
1 x 10” (250mm) C-CAM
®
long throw driver.
1 x 10” (250mm) Auxiliary bass radiator
Input Impedance > 20K Ohms
Mains Input Voltage
"$7_)[
"$7_)[
(Switchable, Factory Region Preset)
Dimensions (H x W x D)
(Excluding amp & feet)
320 x 320 x 330mm
12

x 12

x 13 Inch
Dimensions (H x W x D)
(Including amp & feet)
364 x 320 x 364mm
14

x 12

x 14

Inch
Connections Stereo RCA in, LFE in, 12v Trigger in (3.5mm mono mini-jack)
12v Trigger Input 5 - 12v via 3.5mm mono mini-jack socket
Power Consumption
Standby: < 0.5W (ErP approved)
Typical Idle: < 10W
Max Rated: 200W
Weight (unpacked) 12.8Kg (28lb 2oz)
monitoraudio.com 5