Installation and Operation Manual Eco Convection Ovens | 4/5/7/10-Tray | Steam
FG1BX-UK-MAN-0100 | Rev. A23 (March 2023) MONO
83
Safety (condenser unit)
Always disconnect or isolate the power supply before installation, and allow time for the oven to cool. Only fully-
trained and authorised electricians are permitted to do any electrical repairs and installation work on the oven.
Warning! Before testing the oven with the condenser, check that:
All cover panels and pipe fittings are secure.
The door handles are not damaged.
Operate the condenser only as described in this manual.
All versions should be part of a regular cleaning schedule. Water should be
drained and parts cleaned with an antibacterial wash.
Warning! All connections to the oven must comply with the statuary requirements of the
country of installation.
Caution! Be aware of hot surfaces.
While the oven is in operation (and for some time after use), it is inadvisable
to touch the condenser or the surrounds because of conducted heat.
No unauthorised modifications to the condenser are permitted.
Only use MONO spare parts on this condenser.
To Next Page
Loading...
Need help?
General
