Installation and Operation Manual Eco Connect+ Convection | 4/5/7/10-Tray | Steam
FG1BX-UK-MAN-0300 | Rev. C23 (July 2023) MONO 51
Importing a recipe archive to an oven with IoT firmware installed
1. Insert a USB flash drive into the USB socket.
– Do not force the flash drive into the socket. It only fits in one way.
– A rubber plug may need removal first.
2. Touch the Settings button.
3. Enter the Oven Settings password and touch the OK () button.
NOTE
Default passwords for the various access levels are in the Passwords section. However, for security reasons,
the passwords section may have been removed.
To Next Page
Loading...
