Monster SuperStar - Operation and Usage; Charging and Power; Audio Connection Methods; Bluetooth Pairing

Operation
Power
SuperStar™
comes
with
a
lithium-ion
battery. For best results, fully charge
SuperStarrM
before
use.
(recommended
output
of
charging device
is
2A)
To
charge, plug
the
micro
USB
cable
into
SuperStarrM
and
plug
the
standard
USB
connector
into
your power source.
(Wall
adapter. Laptop. Desktop.
External
battery etc.)
While
charging
the
red
power
LED
will blink.
When
charging
is
complete,
the
light
will
be
solid
red.
Audio Connection
There are three ways
to
connect
to
audio sources.
•
8/uetooth
•
USB
Cable
•
Direct
AUX
In
3.5mm
8/uetooth
Connection
To
use
8/uetooth
for your audio connection first pair
SuperStar™
with
your
audio source. (Music
Player.
Smartphone. Laptop.
Or
other
8/uetooth
equipped
device
that
can act
as
a source
of
music)
First press and
hold
the
8/uetooth
button
for three seconds
or
until you hear
the
tone. The
blue
Sync
LED
will
come on and
blink. This means
SuperStarrM
is
in pairing mode. Make sure
8/uetooth
is
enabled
on
your
audio source and in a
few moments
"Monster
SuperStarrM"
will appear on your
list
of
possible
8/uetooth
connections.
Press
'pair' or 'connect' on
your
music
player
and
when
the
connection
is
made,
the
blue
LED
on
SuperStarrM
will
turn
solid blue.
You
are paired.
(Conveniently, from
now
on, when you
turn
on
SuperStarrM
it
will
automatically
search for
the
last
8/uetooth
device
it
was paired with).
NOTE:
The
unit
includes
the
ability
to
reset your
8/uetooth
pairing information
on
SuperStarrM.
To
do
this press and
hold
the
8/uetooth
button
for
more than five
seconds and previous pairing information
will
be
deleted
from
SuperStarrM
USB
Connection
You
can connect your
SuperStarrM
directly
to
a playback device using
the
included
USB
cable. In
this
mode
we recommend
controlling
volume
and track
selection from your
playback
device.
Wired
Connection
SuperStarrM
has
a standard 3.5mm audio in jack.
If
there
is
no
8/uetooth
source
available
of
if
you
simply prefer a wired connection, you can connect your
SuperStar™
directly
to
your
audio source using a stereo 3.5mm connector.
You
will
need a
cable
with
stereo
male
3.5mm connection on
both
ends
of
the
cable.
(This
cable
is
not
included)