Montarbo Spot 2500T User Manual

PROFESSIONAL LOUDSPEAKER SYSTEM PROFESSIONAL LOUDSPEAKER SYSTEM
10
PROFESSIONAL LOUDSPEAKER SYSTEM PROFESSIONAL LOUDSPEAKER SYSTEM
POLE MOUNTING: Preset P1
STACKED: Preset P2
DIPOLE: Preset P3
CLUSTER: Preset P4
user's manual
ENGLISH
3 - INSTALLATION AND WIRING
3.1 - INSTALLATION
The full-range SPOT2500T speakers may be installed in various ways,
and the internal DSP presets allow to optimize their performances in the
various configurations.
- They may be installed over of the SPOT15B bass cabinet, using the SM3
dedicated mounting pole (optional accessory) fitted in the built-in adapters
(h: page 5 and q: page 9) - 'Pole Mounting' conguration, P1 preset.
- They may be placed on stage ground or stacked over the SPOT15B bass
cabinet -'Stacked' conguration, P2 preset.
- The may be stacked upside-down over the SPOT15B bass cabinet, thus
creating a dipole conguration that will result in increased sound pressure
at low frequencies -'Dipole' conguration, P3 preset.
- They may be placed side-by-side to create a 'cluster' of two or more
speakers, thus extending the horizontal dispersion without creating
wave-front interferences - 'Cluster' conguration, P4 preset.
For each one of these congurations, illustrated in the following gures, a
dedicated factory preset is provided in the internal DSP (refer to par. 4.1).

Montarbo Spot 2500T Specifications

General

Brand	Montarbo
Model	Spot 2500T
Category	Speakers
Language	English