Mooer ShimVerb Micro Series - User Manual

Main Features
Digital Reverb Pedal
Ÿ
Ÿ Full metal shell
Ÿ Very small and exquisite
Ÿ True bypass
Ÿ DC 9V Adapter power supply
3 Reverb Modes: Room, Spring, Shimmer
Room: Different sized true acoustics reverb, from room to hall.
Spring: Simulates a classic spring reverberation, vintage 60’s
Surfing sound.
Shimmer: Add rich overtone into the reverb sound, spacy, smooth
and shining, very popular in Post Rock music.
3
4
5
6
9
8
7
6. Mode Switch:
Switch between Room mode, Spring mode and Shimmer mode.
7. LEVEL Knob:
Adjust the level of the reverb sound.
8. COLOR Knob:
Adjust the tone of the reverb sound in Room mode;
Adjust the volume of particular spring effects in Spring mode;
Adjust the brightness of overtone in Shimmer mode.
9. DECAY Knob: Adjust the decay time of the reverb sound.
Reverb Modes: 3 (Room, Spring, Shimmer)
Input: 1/4” monaural jack (impedance: 470k Ohms)
Output: 1/4” monaural jack (impedance: 100 Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 128 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 170g
Accessories: Owner’s Manual
ShimVerb
* Disclaimer: Any specification’s update won't be amended in this manual.

Summary

Precautions

Power Supply Precautions

Use designated 9V DC adapter with center minus. Do not exceed 12V. Unplug during storms.

Connection and Handling Safety

Turn off power before connecting/disconnecting. Avoid excessive force, dropping, or shock.

Cleaning and Environmental Guidelines

Clean with a dry cloth. Avoid liquids and harsh cleaners. Keep away from extreme conditions.

Electrical Interference

Operate unit away from radios and televisions to prevent reception interference.

Main Features

Effects Explanation

Panel Instruction

True Bypass Footswitch

Switch between effects and bypass status by pushing down the footswitch.

On;Off LED Indicator

Indicates effects or bypass status; LED lit means effects are on.

DC Power Input

Connect a 9-volt DC regulated AC adapter with center minus polarity.

Input and Output Jacks

1/4" mono audio jacks for connecting guitar input and signal output.

Mode Switch

Switch between Room, Spring, and Shimmer reverb modes.

Level Knob

Adjusts the overall level of the reverb sound.

Color Knob Functionality

Adjusts tone (Room), spring effect volume (Spring), or overtone brightness (Shimmer).

Decay Knob

Adjusts the decay time of the reverb sound.

Specifications

Mooer ShimVerb Micro Series Specifications

General

Type	Reverb
Series	Micro Series
Brand	Mooer
Model	ShimVerb
Current Draw	100 mA
True Bypass	Yes
Power Supply	9V DC (center negative)
Dimensions	93.5mm x 42mm x 52mm
Output Impedance	100 Ohms